Traditional Timber Oil

Gain a beautiful, warm and understated finish to your timber with Traditional Timber Oil.

Our natural decking oil will ensure your timber holds on to its character and charm as it weathers naturally, and will not crack or peel.

By selecting from our beautiful colour scheme of a warm Merbau or Natural colour, or even a wonderful Weathered Grey, these timber oils will highlight your timber pieces as a feature in your home for years to come.

With added eucalyptus oil, application is easy as it dissolves any leftover residue or material, promising that elegant timber finish.

Safety Data Sheet

Find a stockist

WHERE TO USE

All exterior timber including decking, outdoor furniture, pergolas, steps, fences, gates, posts and beams.

COVERAGE RATE

6m² per Litre

NUMBER OF COATS

Bare Timber: 2
Maintenance: 1

RECOAT TIME

Wipe off excess after 30 mins.
Recoat after 1 hour.

DRY TIME

18 hours

CLEAN UP

Mineral Turpentine Clean up

SIZES

4L & 10L

How to prepare your deck:

Before you get started coating...Let's Prep!

New Timber

How to prepare new timber:

Allow your new timber to weather for 4-6 weeks before applying.
Ensure your deck is clean and ready to go with Feast Watson Woodclean.
Sand the surface lightly to remove any raised grain for the best results for your deck. And remember, remove any leftover dust before coating!

Weathering Timber

How to prepare weathered timber:

Ensure your deck is clean and ready to go with Feast Watson Woodclean.
For best results, sand your timber slightly to remove any deteriorations. Make sure to remove all left over sand before coating!

Already Coated Timber

How to prepare previously coated timber:

If your deck already has stain or oil, don't worry. Check if your surface is ready by sprinkling water onto your deck:

if the water absorbs into the timber - you're good to go!
if the water beads, you will need to let your deck further weather, or if you don't want to wait, you can either sand or strip your deck back to bare timber.

Painted or Varnished Timber

Do you have a painted or varnished surface?
Before coating, you must bring your timber back to bare timber by stripping or sanding your deck.

How to apply Traditional Timber Oil:

Let's bring your deck back to greatness!

Before you get started, you need to ensure the following:

You have followed our preparation guide
Your timber is completely dry before coating.
You've stirred your Traditional Decking Oil thoroughly before starting (and during!). Avoid introducing any bubbles!
If you are coating a large space and need more than one Traditional Oil, mix both cans together in a large container.

Ok, let's get started:

Work 3-4 boards at a time along the grain, and apply one coat of Traditional Timber Oil using a brush, roller, spray, or Feast Watson Floor Applicator. Using a roller or spray? Make sure to back brush the coating. This way you will ensure even penetration.
Note: ensure your edges and end grain are fully coated!
Let the oil penetrate into your timber for 30-60 minutes, and then wipe off any excess product with a dry applicator or cloth before your timber becomes tacky.
Let your timber dry for another 60 minutes.
Apply a second coat. After 30-60 minutes, wipe off any excess product.
Note: Wiping off the excess product is an important step to gaining that beautiful finish!

If you want a longer-lasting finish, apply a third coat, and follow the previous steps.

You can start walking on your beautiful new deck after 18 hours of drying time.

How to maintain your deck using Traditional Timber Oil?

All done! Now, how do you make sure it maintains this stunning look?

Regularly check on the coated timber to look for any colour loss, dryness or weathering. If this occurs, recoat the timber and it will return to its original beauty.
If you recoat, don’t forget to clean your deck first using Woodclean!

How to

Feast Watson Traditional Timber Oil in Weathered Grey creates an instant grey look to your deck allowing you to have the beauty and style of a light grey deck without your deck being damaged the harsh sun and rain. It's an easy process to keep your deck looking this good. If this is the look you are going for you can download the how-to guide as a PDF and use it to help you along your way with your project.

DOWNLOAD PDF GUIDE

Woodclean

A powerful oxalic acid based clearner to remove oil, mould, stains and tannins from outdoor timber.

PREPARATION