Woodprep

Feast Watson Woodprep is a high strength timber preparation cleaner for new and weathered exterior timber. Using Woodprep will enhance adhesion of top coats, leading to long lasting and more evenly applied top-coats. Its use ensures the top coat adheres to the timber and performs to its best potential.

This high strength, dual acid formula (Oxalic & Phosphoric Acid) helps remove oils, mould, stains, and tannins from new and weathered timber. Woodprep restores the natural colour of grey and weathered timber and is suitable for decking, outdoor furniture, fences, pergolas and other exterior timber.

Safety Data Sheet

Find a stockist

WHERE TO USE

Cleaning any exterior timber

COVERAGE RATE

20m² per litre

RECOAT TIME

When completely dry

DRY TIME

Approx 20 Minutes

CLEAN UP

Water

SIZES

1L, 4L

MIX RATIO

1 part Woodclean to 4 parts water.

How to prepare your timber for Feast Watson Woodprep:

Just sweep down your surface and thoroughly wet down with water.

How to apply Feast Watson Woodprep:

Dilute Woodprep in water by mixing 1 part Woodprep to 4 parts water. Make sure to stir your diluted mixture thoroughly!
Using a stiff bristle brush or broom, apply Woodprep to dampened timber and scrub surface vigorously.
Go make yourself a coffee and allow the Woodprep solution to penetrate the surface for 20 minutes.
After 20 minutes has elapsed, rinse with high pressure water.
Allow the surface to dry completely before applying further products.

Note: Protect nearby paint, plants, and other surfaces with plastic sheeting, or wet them first and rinse immediately after. Woodprep may cause erosion of some timber sealants and fillers so be sure to test surface prior to application.

How to maintain your timber after using Feast Watson Woodprep:

Monitor your timber for a buildup of dirt, grime, and mould.
When required, simply apply Woodprep as per the application instructions.

Say hello to squeaky clean timber!

Traditional Timber Oil

Traditional Timber Oil

A natural Timber Decking Oil to nourish and protect outdoor timber available in 3 muted tones.

Wet Look Decking Oil

Wet Look Decking Oil

A gloss finish deciing oil with the benefit of easy water washup.

Timber & Deck Stain

Timber & Deck Stain

The Timber and Deck Stain will achieve a rich colour and subtle sheen to your timber, providing a new and modern look to your timber and outdoor area.

PREPARATION

How to prepare your timber for Feast Watson Woodprep:

Just sweep down your surface and thoroughly wet down with water.

APPLICATION

How to apply Feast Watson Woodprep:

Dilute Woodprep in water by mixing 1 part Woodprep to 4 parts water. Make sure to stir your diluted mixture thoroughly!
Using a stiff bristle brush or broom, apply Woodprep to dampened timber and scrub surface vigorously.
Go make yourself a coffee and allow the Woodprep solution to penetrate the surface for 20 minutes.
After 20 minutes has elapsed, rinse with high pressure water.
Allow the surface to dry completely before applying further products.

Note: Protect nearby paint, plants, and other surfaces with plastic sheeting, or wet them first and rinse immediately after. Woodprep may cause erosion of some timber sealants and fillers so be sure to test surface prior to application.

MAINTENANCE

How to maintain your timber after using Feast Watson Woodprep:

Monitor your timber for a buildup of dirt, grime, and mould.
When required, simply apply Woodprep as per the application instructions.

Say hello to squeaky clean timber!

RELATED PRODUCTS

Traditional Timber Oil

Traditional Timber Oil

A natural Timber Decking Oil to nourish and protect outdoor timber available in 3 muted tones.

Wet Look Decking Oil

Wet Look Decking Oil

A gloss finish deciing oil with the benefit of easy water washup.

Timber & Deck Stain

Timber & Deck Stain

The Timber and Deck Stain will achieve a rich colour and subtle sheen to your timber, providing a new and modern look to your timber and outdoor area.

System.IO.IOException: The process cannot access the file 'C:\local\Temp\ExamineIndexes\87b109f06c75ad52504281172cd4c66b\ContentIndex\_15.cfs' because it is being used by another process.
   at System.IO.FileSystem.DeleteFile(String fullPath)
   at System.IO.FileInfo.Delete()
   at Examine.Lucene.Directories.SyncedFileSystemDirectoryFactory.ClearDirectory(DirectoryInfo directoryInfo)
   at Examine.Lucene.Directories.SyncedFileSystemDirectoryFactory.SyncIndex(IndexWriter sourceIndexWriter, Boolean forceUnlock, String indexName, DirectoryInfo destinationDirectory, DirectoryInfo tempDir)
   at Examine.Lucene.Directories.SyncedFileSystemDirectoryFactory.TryCreateDirectory(LuceneIndex luceneIndex, Boolean forceUnlock, Directory& directory)
   at Examine.Lucene.Directories.SyncedFileSystemDirectoryFactory.CreateDirectory(LuceneIndex luceneIndex, Boolean forceUnlock)
   at Examine.Lucene.Directories.DirectoryFactoryBase.Examine.Lucene.Directories.IDirectoryFactory.CreateDirectory(LuceneIndex luceneIndex, Boolean forceUnlock)
   at Umbraco.Cms.Infrastructure.Examine.ConfigurationEnabledDirectoryFactory.CreateDirectory(LuceneIndex luceneIndex, Boolean forceUnlock)
   at Examine.Lucene.Directories.DirectoryFactoryBase.Examine.Lucene.Directories.IDirectoryFactory.CreateDirectory(LuceneIndex luceneIndex, Boolean forceUnlock)
   at Examine.Lucene.Providers.LuceneIndex.<>c__DisplayClass1_0.<.ctor>b__0()
   at System.Lazy`1.ViaFactory(LazyThreadSafetyMode mode)
   at System.Lazy`1.ExecutionAndPublication(LazyHelper executionAndPublication, Boolean useDefaultConstructor)
   at System.Lazy`1.CreateValue()
   at System.Lazy`1.get_Value()
   at Examine.Lucene.Providers.LuceneIndex.GetLuceneDirectory()
   at Examine.Lucene.Providers.LuceneIndex.IndexExistsImpl()
   at Examine.Lucene.Providers.LuceneIndex.IndexExists()
   at Examine.Lucene.Providers.LuceneIndex.EnsureIndex(Boolean forceOverwrite)
   at Examine.Lucene.Providers.LuceneIndex.get_IndexWriter()
   at Examine.Lucene.Providers.LuceneIndex.CreateSearcher()
   at System.Lazy`1.ViaFactory(LazyThreadSafetyMode mode)
--- End of stack trace from previous location ---
   at System.Lazy`1.CreateValue()
   at Examine.Lucene.Providers.LuceneIndex.get_Searcher()
   at DuluxGroup.CMSWeb.Services.ContentIndexQueryService.GetContentsBySearchRequestModel(String indexName, String[] includeNodeTypeAliases, SearchRequestModel searchRequestModel) in D:\a\1\s\src\DuluxGroup.CMSWeb\Services\ContentIndexQueryService.cs:line 79
   at DuluxGroup.CMSWeb.Services.ItemListingService.GetContentsByStarterNodeAndCriteria(ItemListingSource itemListingSource, IEnumerable`1 criteria) in D:\a\1\s\src\DuluxGroup.CMSWeb\Services\ItemListingService.cs:line 244
   at DuluxGroup.CMSWeb.Services.ItemListingService.GetContentInfoModelsFromChildNode(ItemListingSource itemListingSource, Int32 numberOfDisplayItems) in D:\a\1\s\src\DuluxGroup.CMSWeb\Services\ItemListingService.cs:line 140
   at DuluxGroup.CMSWeb.Services.ItemListingService.GetSortedAndOrderedContentInfos(ItemListingSource itemListingSource, Int32 numberOfDisplayItems) in D:\a\1\s\src\DuluxGroup.CMSWeb\Services\ItemListingService.cs:line 114
   at DuluxGroup.CMSWeb.Services.ItemListingService.GetViewModel(ItemListing itemListing) in D:\a\1\s\src\DuluxGroup.CMSWeb\Services\ItemListingService.cs:line 47
   at AspNetCore.Views_Partials_grid_editors_DocTypeGridEditor_itemListing.ExecuteAsync()
   at Microsoft.AspNetCore.Mvc.Razor.RazorView.RenderPageCoreAsync(IRazorPage page, ViewContext context)
   at Microsoft.AspNetCore.Mvc.Razor.RazorView.RenderPageAsync(IRazorPage page, ViewContext context, Boolean invokeViewStarts)
   at Microsoft.AspNetCore.Mvc.Razor.RazorView.RenderAsync(ViewContext context)
   at Microsoft.AspNetCore.Mvc.ViewComponents.ViewViewComponentResult.ExecuteAsync(ViewComponentContext context)
   at Microsoft.AspNetCore.Mvc.ViewComponents.DefaultViewComponentInvoker.InvokeAsync(ViewComponentContext context)
   at Microsoft.AspNetCore.Mvc.ViewComponents.DefaultViewComponentHelper.InvokeCoreAsync(ViewComponentDescriptor descriptor, Object arguments)
   at Our.Umbraco.DocTypeGridEditor.Helpers.DocTypeGridEditorHelper.RenderDocTypeGridEditorItem(IViewComponentHelper helper, IHtmlHelper htmlHelper, IPublishedElement content, String editorAlias, String viewPath, String previewViewPath, Boolean isPreview) in D:\a\1\s\src\Our.Umbraco.DocTypeGridEditor\Helpers\DocTypeGridEditorHelper.cs:line 254
   at Our.Umbraco.DocTypeGridEditor.Helpers.DocTypeGridEditorHelper.RenderDocTypeGridEditorItem(IViewComponentHelper helper, IHtmlHelper htmlHelper, Object model) in D:\a\1\s\src\Our.Umbraco.DocTypeGridEditor\Helpers\DocTypeGridEditorHelper.cs:line 222
   at CallSite.Target(Closure, CallSite, Object)
   at AspNetCore.app_plugins_doctypegrideditor_render_doctypegrideditor.ExecuteAsync() in C:\home\site\wwwroot\app_plugins\doctypegrideditor\render\doctypegrideditor.cshtml:line 4
   at Microsoft.AspNetCore.Mvc.Razor.RazorView.RenderPageCoreAsync(IRazorPage page, ViewContext context)
   at Microsoft.AspNetCore.Mvc.Razor.RazorView.RenderPageAsync(IRazorPage page, ViewContext context, Boolean invokeViewStarts)
   at Microsoft.AspNetCore.Mvc.Razor.RazorView.RenderAsync(ViewContext context)
   at Microsoft.AspNetCore.Mvc.ViewFeatures.HtmlHelper.RenderPartialCoreAsync(String partialViewName, Object model, ViewDataDictionary viewData, TextWriter writer)
   at Microsoft.AspNetCore.Mvc.ViewFeatures.HtmlHelper.PartialAsync(String partialViewName, Object model, ViewDataDictionary viewData)
   at AspNetCore.Views_Partials_grid_editors_base.ExecuteAsync() in C:\home\site\wwwroot\Views\Partials\grid\editors\base.cshtml:line 6

Footer Banner Image