Timber Floor Stain & Varnish Liming White

Create a new airy, bright feel to any room with the Timber Floor Stain & Varnish Liming White.

This traditional whitewash stain has a professional clear polyurethane for a one-step finish and durable protection for interior timber floors.

You can trust that our Timber Floor Stain & Varnish will not yellow over time and will provide you the flexibility to build your opacity and whiteness. You can be the designer!

With your new whitewash floorboards and timber, you can achieve that calming, bright, sophisticated look.

Safety Data Sheet

Find a stockist

WHERE TO USE

Bare timber and cork flooring (existing timber must be sanded back to bear before applying Timber Floor Stain & Varnish Liming White)

COVERAGE RATE

8m2 per Litre

NUMBER OF COATS

Bare Timber: 3

RECOAT TIME

Recoat after 2 hours

DRY TIME

Light Floor Traffic - 24 hours
Normal Traffic - 72 hours
Full Curing after 7 Days

CLEAN UP

Water

SIZES

How to prepare your Timber Floor Stain & Varnish:

New or Bare Timber/Cork:

Punch exposed nails below the surface. If you have any holes and imperfections, they should be filled with timber putty.
Sand timber to an even, smooth surface. Remember to vacuum and wipe to remove dust.

NOTE: Prepare uncoated cork tiles in accordance with the supplier's recommendation.

For best results, seal uncoated or tannin rich timber with Feast Watson Proofseal and allow to dry thoroughly before applying Timber Floor Stain & Varnish.

Previously Coated Timber

Sand back your coated surface back to bare timber. Remember to remove all sanding dust before coating!

How to apply your Timber Floor Stain & Varnish Liming White:

First, check that you’re ready to go:

Without introducing any bubbles, use a flat blade stirrer and thoroughly stir your product both before and during application.

Note: If you are coating a large space and need more than one Timber Floor Stain & Varnish Liming White, mix both cans together in a large container.

Make sure you love your colour choice! Test your colour on an off-cut to ensure you love your colour.

Let’s do this:

Using the Feast Watson Floor Finish Applicator, brush, or short nap mohair roller, apply your first coat. Work along 3-4 floorboards at a time, maintaining a wet edge to prevent lap marks and lay off in the direction of the grain. And remember, avoid introducing any bubbles!
- If applying by roller, use a short nap (5mm) mohair roller. Ensure edges and end grain are fully coated.
Timber Floor Stain & Varnish is a three-coat flooring system. If you have achieved your colour before 3 coats that's okay! Finish off your floor with a suitable flooring polyurethane and you're good to go.

Note: With each coat, you get a stronger Liming White colour. Continue applying coats by the above procedure, sanding between coats, until your desired colour is achieved.

How to maintain my floor using Timber Floor Stain & Varnish Liming White:

Regularly clean using a suitable liquid floor cleaner.
Ensure you keep an eye on your floor for signs of colour loss or surface defects.
When floor requires an additional coat of Timber Floor Stain & Varnish, apply as per the instructions for Previously Coated Surfaces.

DOWNLOAD PDF GUIDE

PREPARATION